Knowledge

Home/Knowledge/Details

How is activated sludge acclimated?

1. Temperature: Temperature is a major environmental factor affecting the entire treatment process. Various microorganisms grow within specific temperature ranges. The temperature range for biochemical treatment is 10–40℃, with the optimal temperature being 20–30℃. Any microorganism can only survive within a certain temperature range, and can grow and reproduce in large quantities within a suitable temperature range. During sludge cultivation, it is essential to place them under optimal temperature conditions to allow microorganisms to grow at the fastest rate. Temperatures that are too low or too high will slow down the metabolic rate and growth rate; excessively high temperatures can be lethal to microorganisms.

 

2. pH Value: The life activities and metabolism of microorganisms are closely related to pH value. The optimal pH value for most bacteria and protozoa is 6.5–7.5, in which they grow and reproduce best. Their tolerance range for pH values ​​is 4–10. In the aeration system of activated sludge wastewater treatment, flocculent bacteria, as the main component of activated sludge, can produce more viscous substances and form good flocculent matter under pH conditions of 6.5–8.5.

 

3. Nutrients: Microorganisms in wastewater continuously absorb nutrients, degrading complex macromolecules or high-energy compounds into simpler low-molecular-weight substances or low-energy compounds through decomposition metabolism (catabolism) and releasing energy. Through anabolism (assimilation), they utilize the energy and substances provided by decomposition metabolism to convert them into their own cellular material. Simultaneously, they excrete metabolic waste. Water, carbon sources, nitrogen sources, inorganic salts, and growth factors are the conditions for microbial growth. Nitrogen sources and phosphorus-containing inorganic salts should be added to the wastewater at a BOD5:N:P ratio of 100:4:1 to create favorable nutrient conditions for activated sludge cultivation.

 

4. Suspended Solids (SS): Wastewater contains a large amount of suspended solids. Pretreatment removes most of the suspended solids, but some cannot be degraded and will form a scum layer during aeration, but this does not affect the system's wastewater treatment.

 

5. Dissolved Oxygen (DO): Well-cultivated biochemical bacteria are aerobic. Oxygen plays two roles for aerobic microorganisms:

① It acts as the final electron acceptor in respiration;

② Oxygen is required for the biosynthesis of alcohols and unsaturated fatty acids. Only water-soluble oxygen (dissolved oxygen) can be utilized by microorganisms. In activated sludge cultivation, the DO (dissolved oxygen) supply must be considered comprehensively based on the structure and concentration of the activated sludge and the concentration of the wastewater.

 

Specifically, this is determined by observing the structure and maturity of the activated sludge under a microscope, measuring the concentration of the mixed liquor in the aeration tank, and monitoring changes in CODcr in the supernatant of the aeration tank. Based on experience, DO is controlled at 1–2 mg/L in the early stages of cultivation. This is because the bacterial flocs have not yet formed a flocculent structure; excessive oxygen supply will increase microbial metabolic activity, while insufficient nutrient supply will lead to oxidation of the sludge itself, promoting sludge aging. During the sludge maturation stage, DO should be increased to around 3–4 mg/L to ensure sufficient DO for the microorganisms within the sludge flocs, resulting in good settling performance. Throughout the cultivation process, the DO should be gradually increased according to the sludge's development.

Special attention should be paid to ensuring that dissolved oxygen (DO) is not too low. Insufficient DO will deprive aerobic microorganisms of enough oxygen, affecting their normal growth patterns and reducing their metabolic capacity. Simultaneously, microorganisms with lower DO requirements will proliferate, disrupting the normal biochemical bacterial culture process.

 

6. Mixed liquor MLSS concentration: Microorganisms are the active component of biological sludge and the main body of organic matter metabolism, playing a major role in biological treatment processes. The MLSS value of the mixed liquor sludge roughly indicates the amount of active microorganisms. Biological treatment of high-concentration organic wastewater generally requires maintaining a high sludge concentration. During the commissioning and operation of this project, the MLSS range was between 4.4 and 5.6 g/L, with an optimal value of approximately 4.8 g/L.

 

7. Influent CODcr concentration: The concentration of organic matter in the influent has a significant impact on treatment.

 

8. Sludge biophase microscopy: Activated sludge is at different growth stages, and various microorganisms exhibit different proportions. Bacteria undertake the basic metabolic functions of decomposing organic matter, while protozoa (including metazoans) consume free bacteria. During the wastewater commissioning and operation, a wide variety of microorganisms were observed, including bacteria, algae such as green algae, protozoa, and metazoa. Protozoa included *Heliotropium*, *Cyclops*, and *Cyclops*, while nematodes were observed among the metazoa. The presence of abundant sessile ciliates, such as *Cyclops*, in the mixed liquor during the later stages of commissioning and operation indicates that the treatment system has good effluent quality.

 

9. Sludge Volume Index (SVI): During normal operation, the SVI is approximately 801/mg.