As a supplier of SCR aftertreatment systems, I've witnessed firsthand the growing importance of these technologies, especially in vehicles equipped with continuously variable transmissions (CVTs). In this blog, I'll delve into how the SCR aftertreatment system works in such vehicles, exploring its components, processes, and benefits.

Understanding the Basics of SCR Aftertreatment Systems
Selective Catalytic Reduction (SCR) is an advanced active emissions control technology system that injects a liquid-reductant agent through a special catalyst into the exhaust stream of a diesel engine. The reductant source is usually automotive-grade urea, otherwise known as Diesel Exhaust Fluid (DEF). When the DEF is heated, it releases ammonia (NH₃), which reacts with nitrogen oxides (NOₓ) in the exhaust stream over a catalyst, converting them into nitrogen (N₂) and water vapor (H₂O).
In vehicles with CVTs, the SCR system plays a crucial role in meeting stringent emission standards. CVTs are known for their smooth acceleration and improved fuel efficiency, but like all internal combustion engines, they produce harmful emissions, including NOₓ. The SCR aftertreatment system helps to reduce these emissions, making CVT vehicles more environmentally friendly.
Components of an SCR Aftertreatment System
The SCR aftertreatment system consists of several key components, each playing a vital role in the emission reduction process.
1. Diesel Exhaust Fluid (DEF) Tank
The DEF tank stores the urea-based solution that is used in the SCR process. The tank is typically located near the vehicle's fuel tank and is designed to hold a sufficient amount of DEF to meet the vehicle's emission control needs.
2. DEF Pump and Dosing Module
The DEF pump is responsible for drawing the DEF from the tank and delivering it to the dosing module. The dosing module precisely meters the amount of DEF that is injected into the exhaust stream based on the engine's operating conditions.
3. Catalytic Converter
The catalytic converter is the heart of the SCR system. It contains a special catalyst that promotes the chemical reaction between the ammonia from the DEF and the NOₓ in the exhaust. The catalyst is usually made of a combination of metals, such as platinum, palladium, and rhodium.
4. Exhaust Temperature Sensors
Exhaust temperature sensors are used to monitor the temperature of the exhaust gas. The SCR system operates most efficiently within a specific temperature range, typically between 200°C and 500°C. The sensors provide feedback to the vehicle's engine control unit (ECU), which adjusts the dosing of DEF accordingly.
5. NOₓ Sensors
NOₓ sensors are used to measure the concentration of NOₓ in the exhaust gas before and after the catalytic converter. The sensors provide feedback to the ECU, which can adjust the dosing of DEF to ensure that the emission reduction targets are met.
How the SCR System Works in CVT Vehicles
The operation of the SCR aftertreatment system in CVT vehicles can be divided into several steps.
1. Engine Operation
When the CVT vehicle's engine is running, it produces exhaust gas that contains NOₓ and other pollutants. The exhaust gas flows through the exhaust system towards the SCR aftertreatment system.
2. DEF Injection
As the exhaust gas reaches the dosing module, the DEF pump delivers a precise amount of DEF into the exhaust stream. The DEF is atomized into fine droplets, which mix with the hot exhaust gas.
3. Ammonia Generation
When the DEF droplets are heated by the exhaust gas, they decompose into ammonia (NH₃) and carbon dioxide (CO₂). The ammonia is then available to react with the NOₓ in the exhaust.
4. NOₓ Reduction
The ammonia and NOₓ in the exhaust gas flow into the catalytic converter. Inside the converter, the ammonia reacts with the NOₓ over the catalyst, converting them into nitrogen (N₂) and water vapor (H₂O). This chemical reaction is known as the SCR reaction.
5. Emission Monitoring
The NOₓ sensors in the exhaust system continuously monitor the concentration of NOₓ before and after the catalytic converter. The ECU uses this information to adjust the dosing of DEF to ensure that the emission reduction targets are met. If the NOₓ levels are too high, the ECU will increase the dosing of DEF; if the NOₓ levels are too low, the ECU will decrease the dosing of DEF.
Benefits of SCR Aftertreatment Systems in CVT Vehicles
The use of SCR aftertreatment systems in CVT vehicles offers several benefits.
1. Emission Reduction
The primary benefit of the SCR system is its ability to significantly reduce NOₓ emissions. By converting NOₓ into nitrogen and water vapor, the SCR system helps CVT vehicles meet strict emission standards, such as Euro 6 and Tier 4 Final.
2. Fuel Efficiency
Contrary to some misconceptions, the SCR system can actually improve fuel efficiency in CVT vehicles. By reducing the amount of NOₓ in the exhaust, the engine can operate more efficiently, resulting in lower fuel consumption.
3. Durability
SCR systems are designed to be durable and reliable. The catalytic converter and other components are built to withstand the harsh conditions of the exhaust environment, ensuring long-term performance.
4. Compatibility with CVTs
SCR aftertreatment systems are fully compatible with CVTs. The smooth operation of CVTs allows for more precise control of the engine's operating conditions, which in turn enables the SCR system to operate more efficiently.
Applications of SCR Aftertreatment Systems
In addition to their use in CVT vehicles, SCR aftertreatment systems have a wide range of applications. For example, they are commonly used in Marine SCR System to reduce emissions from marine engines. Marine SCR systems are designed to meet the unique challenges of the marine environment, such as high humidity and saltwater corrosion.
SCR systems are also used in Stationary SCR System for power generation, industrial boilers, and other stationary sources of emissions. Stationary SCR systems are typically larger and more complex than those used in vehicles, but they operate on the same basic principles.
Contact Us for SCR Aftertreatment Systems
If you're interested in learning more about our SCR aftertreatment systems or are looking to purchase these systems for your CVT vehicles or other applications, we'd love to hear from you. Our team of experts can provide you with detailed information about our products, including their specifications, performance, and pricing. We can also offer customized solutions to meet your specific needs.
Whether you're a vehicle manufacturer, a fleet operator, or an industrial user, our SCR aftertreatment systems can help you reduce emissions and meet regulatory requirements. Contact us today to start a conversation about how we can support your emission control needs.
References
- Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. McGraw-Hill.
- Johnson, T. V. (2009). The NOx Storage-Reduction Catalyst: A Review. Catalysis Reviews, 51(3), 339-383.
- Koci, M., Parks, J. E., & Harold, M. P. (2007). A Mathematical Model of the SCR Catalyst for Diesel Engine NOx Reduction. Chemical Engineering Science, 62(17), 4874-4887.



