Hey there! As a supplier of Marine SCR Systems, I've seen my fair share of issues pop up with these systems. In this blog, I'm gonna walk you through how to troubleshoot a Marine SCR System. Whether you're a ship operator, a maintenance crew member, or just someone interested in marine tech, this guide should come in handy.
First off, let's quickly go over what a Marine SCR System is. It's an exhaust after - treatment system designed to reduce nitrogen oxide (NOx) emissions from marine engines. It works by injecting a urea - based solution, usually called Diesel Exhaust Fluid (DEF), into the exhaust stream. The DEF breaks down into ammonia, which then reacts with the NOx in the presence of a catalyst to convert it into harmless nitrogen and water. You can learn more about it on our Marine SCR System page.
1. Check the DEF Supply
The first thing you should do when troubleshooting is to look at the DEF supply. A lack of DEF can cause the SCR system to malfunction. Check the DEF tank level. If it's low, refill it with the appropriate DEF. Make sure the DEF you use meets the required standards, as using sub - standard DEF can lead to clogging and other issues.
Inspect the DEF lines for any signs of leaks, cracks, or blockages. A leak can cause a loss of pressure in the system, and a blockage can prevent the proper flow of DEF into the exhaust stream. If you find a leak, you'll need to repair or replace the damaged part. For a blockage, you might need to flush the lines.
2. Examine the Catalyst
The catalyst is a crucial part of the SCR system. Over time, it can get contaminated or damaged. Check for any visible signs of damage, like cracks or chips. Contamination can occur due to the presence of sulfur, oil, or other impurities in the exhaust.
If the catalyst is contaminated, you may need to perform a regeneration process. This usually involves heating the catalyst to a high temperature to burn off the contaminants. However, if the catalyst is severely damaged, it may need to be replaced. You can refer to our Stationary SCR System page for more general information on SCR catalysts, as the principles are somewhat similar.


3. Look at the Temperature Sensors
Temperature sensors play a vital role in the SCR system. They monitor the temperature of the exhaust gas at different points in the system. Incorrect temperature readings can lead to improper dosing of DEF.
Check the temperature sensors for any signs of damage or malfunction. You can use a multimeter to test their electrical resistance. If a sensor is not working correctly, it should be replaced. Make sure to follow the manufacturer's instructions when replacing sensors to ensure proper installation.
4. Evaluate the NOx Sensors
NOx sensors measure the amount of nitrogen oxides in the exhaust gas. They are used to determine the correct amount of DEF to inject. If the NOx sensors are not working accurately, the SCR system may not be able to reduce NOx emissions effectively.
Inspect the NOx sensors for any physical damage. Also, check their calibration. Some sensors can be calibrated using a diagnostic tool. If a sensor is faulty and cannot be calibrated, it will need to be replaced.
5. Check the Dosing System
The dosing system is responsible for injecting the DEF into the exhaust stream. Malfunctions in this system can lead to improper DEF injection.
Look at the dosing pump. Check for any signs of leaks or mechanical failure. Make sure the pump is operating at the correct pressure. The dosing valve should also be inspected. A stuck or malfunctioning valve can prevent the proper flow of DEF. Clean or replace the valve if necessary.
6. Analyze the Control Unit
The control unit is the brain of the SCR system. It receives data from the sensors and controls the dosing system accordingly. A malfunctioning control unit can cause all sorts of problems.
Check for any error codes in the control unit. Most modern SCR systems have a diagnostic interface that allows you to read these codes. The error codes can give you a clue as to what's going wrong. If you're not sure how to interpret the codes, refer to the system's manual or contact our technical support team.
7. Inspect the Exhaust System
The condition of the exhaust system can also affect the performance of the SCR system. Check for any leaks in the exhaust pipes. A leak can cause a loss of exhaust pressure and affect the flow of exhaust gas through the SCR system.
Look for any blockages in the exhaust system. Soot or other debris can build up over time and cause a blockage. If you find a blockage, you'll need to clean the exhaust pipes.
8. Monitor the System Performance
Once you've made any necessary repairs or adjustments, monitor the system's performance. Check the NOx emissions levels to see if they have improved. You can use a portable emissions analyzer to measure the NOx levels.
Also, keep an eye on the DEF consumption. If the system is working correctly, the DEF consumption should be within the expected range. If you notice any abnormal changes in the NOx emissions or DEF consumption, it may indicate that there are still issues with the system.
Conclusion
Troubleshooting a Marine SCR System can be a bit of a challenge, but by following these steps, you should be able to identify and fix most common problems. Remember, regular maintenance is key to keeping your SCR system in good working condition.
If you're facing persistent issues or need more in - depth support, don't hesitate to reach out to us. We're here to help you ensure that your Marine SCR System operates efficiently and effectively, reducing emissions and keeping your vessel compliant with environmental regulations. Whether you're looking to purchase a new system, need replacement parts, or just want some technical advice, we're ready to have a chat with you. Contact us to start the procurement and negotiation process, and let's work together to keep your marine operations running smoothly.
References
- Marine Exhaust After - treatment System Manuals
- Industry Standards for Marine SCR Systems
- Technical Bulletins from SCR System Manufacturers



