Maintenance measures for sewage treatment equipment

1Through the formulation of systems and regulations, the problem of long-term wear of sewage treatment equipment that cannot be solved is dealt with. This not only ensures the efficient operation of the equipment, but also ensures the safety of equipment performance and prevents accidents. This requires that the maintenance of the equipment be taken seriously, rules and regulations that meet the requirements of equipment operation be formulated, the content of equipment maintenance be designed, and maintenance and overhaul work be required to be carried out regularly.
2While increasing the use of equipment, accident prevention work should be done well. For example, in the maintenance of the reducer in the sewage treatment equipment, different greases are added according to its characteristics, and the equipment is maintained according to the requirements of the season. And avoid long-term and frequent contact between sewage treatment equipment and sludge and sewage, prevent rust and other problems caused by environmental supermarkets, do a good job in daily anti-corrosion work, and maintain sewage treatment equipment, such as regular oiling and sludge cleaning.
3Strict requirements for the maintenance and maintenance of equipment, and adopt multi-level daily maintenance measures, such as daily maintenance, one-time maintenance, and two-time maintenance, can effectively reduce the impact of climate environment and mechanical vibration on equipment, and play a role in the normal operation of equipment. Daily maintenance work includes: regularly adding lubricating oil to the equipment, simply checking the condition of the equipment, carefully checking the oil level and oil mark of the equipment, etc., cleaning and wiping work should be done before the equipment finishes work, and setting up special maintenance personnel to perform daily maintenance work. The first-level maintenance should be carried out according to the prescribed time. The equipment should be inspected during the intervals of stopping operation, and disassembled for inspection when necessary; the technicians should understand the function and structure of the equipment to reduce the wear of the equipment and extend the service life of the equipment; the first-level maintenance cycle is once every three months, and the second-level maintenance cycle is once a year