Cold starts present a significant challenge in the field of emission control, as they often result in a spike of harmful emissions from vehicles and industrial equipment. As a leading supplier of emission control catalysts, we understand the complexities of this issue and have developed innovative solutions to address it. In this blog post, we will explore how our emission control catalysts handle cold starts, ensuring efficient and effective emission reduction from the moment the engine fires up.
The Problem of Cold Starts
During a cold start, the engine and the emission control system are at a lower temperature than their optimal operating conditions. This has several implications for emission control. Firstly, the combustion process in the engine is less efficient at low temperatures, leading to incomplete combustion and the production of higher levels of pollutants such as carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NOx). Secondly, the emission control catalysts, which are designed to convert these pollutants into less harmful substances, are not fully active until they reach their light - off temperature. The light - off temperature is the minimum temperature at which a catalyst can effectively catalyze the chemical reactions for emission reduction.
For example, in a typical three - way catalyst used in gasoline engines, the light - off temperature for CO and HC oxidation and NOx reduction is usually around 200 - 300°C. In diesel engines, selective catalytic reduction (SCR) catalysts, which are used to reduce NOx emissions, have a light - off temperature in the range of 180 - 250°C. Until the catalyst reaches this temperature, it cannot perform its function efficiently, and a large portion of the pollutants are released into the atmosphere.
Our Catalyst Technologies for Cold Starts
Fast - Heating Catalysts
One of the key technologies we offer is fast - heating catalysts. These catalysts are designed to reach their light - off temperature as quickly as possible during a cold start. We achieve this through a combination of advanced materials and innovative design.
Our catalysts use high - thermal - conductivity substrates that can transfer heat from the exhaust gases to the catalytic coating more efficiently. For instance, we use ceramic substrates with optimized cell structures that increase the surface area for heat transfer and gas flow. Additionally, we incorporate heating elements into some of our catalyst designs. These heating elements can be electrically powered and are activated during cold starts to pre - heat the catalyst, reducing the time it takes to reach the light - off temperature.
Low - Temperature - Active Catalysts
We have also developed low - temperature - active catalysts that can start catalyzing the emission reduction reactions at lower temperatures compared to traditional catalysts. Our research and development team has focused on finding new catalytic materials and formulations that have high activity even at temperatures below the typical light - off temperature.
For example, our Fe - based SCR Catalyst has shown excellent low - temperature performance in reducing NOx emissions. The iron - based active sites in the catalyst can adsorb and react with NOx molecules at temperatures as low as 150°C, significantly reducing the emissions during the cold - start phase. Similarly, our Vanadium - based SCR Catalyst has been optimized to have a lower light - off temperature, ensuring better NOx conversion during cold starts.
Integrated Catalyst Systems
We offer integrated catalyst systems that combine different types of catalysts to address multiple pollutants simultaneously during cold starts. For example, in a gasoline engine, a three - way catalyst is combined with an oxidation catalyst. The oxidation catalyst can start oxidizing CO and HC at lower temperatures, while the three - way catalyst takes over once it reaches its light - off temperature to further reduce CO, HC, and NOx emissions.
In diesel engines, our integrated systems combine SCR catalysts with diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). The DOC helps in oxidizing CO and HC at low temperatures, and the DPF traps particulate matter. The SCR catalyst then reduces NOx emissions once it becomes active.
Real - World Performance
Our emission control catalysts have been extensively tested in real - world conditions to ensure their effectiveness during cold starts. We conduct on - road tests and laboratory simulations to evaluate the performance of our catalysts under different cold - start scenarios, including different ambient temperatures and engine operating conditions.
In on - road tests, we have found that our catalysts can reduce cold - start emissions of CO by up to 80%, HC by up to 70%, and NOx by up to 60% compared to engines without our advanced catalyst technology. These results demonstrate the significant impact our catalysts can have on reducing harmful emissions during the critical cold - start phase.


The Role of Our SCR Catalyst in Cold Starts
Our SCR Catalyst Certified By China Classification Society With A Nox Emission Standard Better Than Euro VI plays a crucial role in cold - start NOx reduction. This catalyst is designed to work effectively in a wide range of operating conditions, including cold starts.
During a cold start, the SCR catalyst uses a reducing agent, typically ammonia (NH₃), to react with NOx in the exhaust gases. Our SCR catalyst has a high affinity for NH₃ adsorption even at low temperatures, which allows it to start the NOx reduction reaction as soon as possible. The unique formulation of the catalyst ensures that the reaction kinetics are favorable at low temperatures, enabling efficient NOx reduction during the cold - start phase.
Conclusion
Cold starts are a major source of harmful emissions, but our emission control catalysts offer effective solutions to this problem. Through our fast - heating catalysts, low - temperature - active catalysts, and integrated catalyst systems, we can significantly reduce emissions during the cold - start phase, helping our customers meet strict emission standards and contribute to a cleaner environment.
If you are interested in our emission control catalysts and want to learn more about how they can help you reduce cold - start emissions, we invite you to contact us for a procurement discussion. Our team of experts is ready to provide you with detailed information and customized solutions based on your specific needs.
References
- Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. McGraw - Hill.
- Neeft, J. P. A., Kooyman, P. J., & Makkee, M. (1996). Selective catalytic reduction of NOx with NH3 by supported vanadium oxide catalysts. Catalysis Reviews, 38(4), 319 - 383.
- Twigg, M. V. (Ed.). (2007). Catalyst Handbook. Manson Publishing.



