Hey there! As a supplier of emission control catalysts, I often get asked about how these catalysts work in vehicles with turbochargers. It's a super interesting topic, so I thought I'd break it down for you in this blog post.
First off, let's talk about why we even need emission control catalysts in vehicles, especially those with turbochargers. Turbochargers are great because they increase the power and efficiency of an engine by forcing more air into the combustion chamber. But this also means that the engine burns more fuel, which can lead to higher emissions of pollutants like nitrogen oxides (NOx), carbon monoxide (CO), and hydrocarbons (HC). That's where emission control catalysts come in. They help to convert these harmful pollutants into less harmful substances before they're released into the atmosphere.
So, how do these catalysts actually work? Well, it all comes down to a process called catalysis. A catalyst is a substance that speeds up a chemical reaction without being consumed in the process. In the case of emission control catalysts, they contain precious metals like platinum, palladium, and rhodium, which act as the active sites for the chemical reactions.
Let's start with the Diesel Oxidation Catalyst (DOC). You can learn more about it here. The DOC is usually the first catalyst in the exhaust system of a diesel engine. Its main job is to oxidize carbon monoxide (CO) and hydrocarbons (HC) into carbon dioxide (CO2) and water (H2O). When the hot exhaust gases pass through the DOC, the precious metals on the catalyst surface react with the CO and HC molecules, breaking them down and converting them into less harmful substances.
The reaction for CO oxidation is pretty straightforward. The CO molecules adsorb onto the catalyst surface, where they react with oxygen (O2) from the exhaust gases to form CO2. The reaction can be represented by the following equation:
2CO + O2 → 2CO2
For hydrocarbons, the oxidation process is a bit more complex because there are different types of hydrocarbons in the exhaust. But in general, the hydrocarbons react with oxygen to form CO2 and H2O. For example, the oxidation of methane (CH4), a simple hydrocarbon, can be represented by the equation:
CH4 + 2O2 → CO2 + 2H2O
Now, let's move on to the Selective Catalytic Reduction (SCR) catalysts. There are two main types: Vanadium-based SCR Catalyst and Fe-based SCR Catalyst. You can find more info about the Vanadium-based SCR Catalyst and the Fe-based SCR Catalyst.
The SCR catalysts are designed to reduce nitrogen oxides (NOx) emissions. They work by using a reducing agent, usually ammonia (NH3), to convert NOx into nitrogen (N2) and water (H2O). The ammonia is typically injected into the exhaust stream upstream of the SCR catalyst.
In a Vanadium-based SCR Catalyst, the vanadium oxide acts as the active component. The NOx molecules in the exhaust gases react with the ammonia on the catalyst surface to form N2 and H2O. The main reactions can be represented by the following equations:
4NO + 4NH3 + O2 → 4N2 + 6H2O
6NO2 + 8NH3 → 7N2 + 12H2O
The Fe-based SCR Catalyst, on the other hand, uses iron as the active metal. It also works in a similar way to convert NOx into N2 and H2O using ammonia as the reducing agent.
Now, you might be wondering how turbochargers fit into all of this. Well, turbochargers can actually have an impact on the performance of the emission control catalysts. Since turbochargers increase the amount of air and fuel going into the engine, they can also increase the exhaust gas temperature and flow rate.


Higher exhaust gas temperatures can be beneficial for the catalysts because they speed up the chemical reactions. But if the temperatures get too high, it can also cause problems. For example, it can lead to the sintering of the precious metals on the catalyst surface, which reduces their activity. That's why we need to design the catalysts to be able to withstand high temperatures.
The increased exhaust gas flow rate can also affect the catalysts. If the flow rate is too high, the exhaust gases might not have enough time to react with the catalyst surface, which can reduce the conversion efficiency. To overcome this, we can optimize the design of the catalyst substrate to ensure good contact between the exhaust gases and the catalyst.
Another important aspect is the interaction between the turbocharger and the SCR system. The turbocharger can affect the distribution of the ammonia in the exhaust stream. If the ammonia is not evenly distributed, it can lead to incomplete NOx reduction and the formation of ammonia slip, which is the release of unreacted ammonia into the atmosphere. To address this, we can use advanced mixing devices in the exhaust system to ensure uniform distribution of the ammonia.
In conclusion, emission control catalysts play a crucial role in reducing the emissions of vehicles with turbochargers. The Diesel Oxidation Catalyst helps to oxidize CO and HC, while the SCR catalysts reduce NOx emissions. The performance of these catalysts can be influenced by the turbocharger, but with proper design and optimization, we can ensure efficient and effective emission control.
If you're in the market for high-quality emission control catalysts for your turbocharged vehicles, I'd love to have a chat with you. Whether you're an automaker, a fleet operator, or someone involved in the automotive industry, we can work together to find the best solutions for your emission control needs. Just reach out and let's start the conversation about how we can help you meet your emission reduction goals.
References
- Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. McGraw-Hill.
- Johnson, T. V., & Krämer, M. (2001). Diesel exhaust aftertreatment: A status report. SAE International Journal of Engines, 4(1), 109-124.
- Maricq, M. M. (2007). Internal combustion engine exhaust emissions. In Encyclopedia of Sustainability Science and Technology (pp. 1141-1156). Springer.



