Hey there! As a supplier of Ammonia Slip Catalysts (ASC), I often get asked about what these little wonders actually do. So, let's dive right in and explore the function of an ammonia slip catalyst.
What's Ammonia Slip?
First off, we need to understand what ammonia slip is. In the world of emissions control, Selective Catalytic Reduction (SCR) systems are commonly used to reduce nitrogen oxides (NOx) in exhaust gases. In an SCR system, ammonia (NH₃) is injected into the exhaust stream. The ammonia reacts with the NOx over a catalyst, converting them into harmless nitrogen (N₂) and water (H₂O).
However, things don't always go perfectly. Sometimes, there's more ammonia injected than can be used in the reaction. This excess ammonia that passes through the SCR system without reacting is what we call ammonia slip. Ammonia slip is a problem because ammonia is a harmful pollutant on its own. It can react with other compounds in the atmosphere to form particulate matter and contribute to air pollution.
The Role of Ammonia Slip Catalyst
This is where the ammonia slip catalyst comes in. An ammonia slip catalyst is installed downstream of the SCR catalyst in an exhaust system. Its main function is to clean up that excess ammonia before it gets released into the environment.
The ASC works by promoting the oxidation of ammonia. When the exhaust gas containing unreacted ammonia passes through the ASC, the catalyst facilitates a reaction where ammonia reacts with oxygen (O₂) in the exhaust gas. The general reaction can be written as:
4NH₃ + 3O₂ → 2N₂ + 6H₂O
In this reaction, ammonia is converted into nitrogen and water, just like in the SCR process. But unlike the SCR catalyst, which is optimized for the reaction between ammonia and NOx, the ASC is designed specifically to deal with the oxidation of ammonia.
Benefits of Using Ammonia Slip Catalysts
Environmental Protection
The most obvious benefit is environmental protection. By reducing ammonia emissions, ASC helps to improve air quality. Ammonia is a major contributor to the formation of fine particulate matter (PM₂.₅), which can have serious health effects, including respiratory and cardiovascular problems. By removing ammonia from the exhaust gas, ASC helps to reduce the amount of PM₂.₅ in the atmosphere.
Compliance with Regulations
Many countries and regions have strict regulations regarding emissions from vehicles and industrial processes. These regulations often include limits on ammonia emissions. Using an ammonia slip catalyst helps companies and vehicle owners to comply with these regulations, avoiding costly fines and penalties.
System Efficiency
ASC can also improve the overall efficiency of the SCR system. In an SCR system, it's common to inject a little more ammonia than is strictly necessary to ensure complete NOx reduction. This is because it's better to have a little ammonia slip than to have high NOx emissions. However, the excess ammonia can cause problems downstream, such as fouling of other components in the exhaust system. By removing the excess ammonia, ASC helps to keep the exhaust system clean and functioning properly, reducing maintenance costs and improving the lifespan of the system.


Types of Ammonia Slip Catalysts
There are different types of ammonia slip catalysts available, each with its own advantages and disadvantages.
Platinum Group Metal (PGM) - Based ASC
PGM-based ASC are widely used because they have high activity and good selectivity for ammonia oxidation. Platinum and palladium are the most commonly used PGMs in these catalysts. They work well at relatively low temperatures, making them suitable for applications where the exhaust gas temperature is not very high. However, PGMs are expensive, which can increase the cost of the catalyst.
Base Metal - Based ASC
Base metal - based ASC, such as those based on copper (Cu) or iron (Fe), are becoming more popular due to their lower cost. Fe-based SCR Catalyst can also be used as an ASC in some cases. These catalysts have good activity at higher temperatures and can be more resistant to sulfur poisoning compared to PGM-based catalysts. However, their performance at low temperatures may not be as good as PGM-based catalysts.
Compatibility with Other Catalysts
ASC often works in conjunction with other catalysts in an exhaust system. For example, it is usually installed downstream of an SCR catalyst and may also be used in combination with a Diesel Oxidation Catalyst (DOC).
The DOC is used to oxidize carbon monoxide (CO) and hydrocarbons (HC) in the exhaust gas, as well as to convert some of the nitrogen monoxide (NO) to nitrogen dioxide (NO₂). The SCR catalyst then uses ammonia to reduce NOx to nitrogen and water. Finally, the ASC cleans up any excess ammonia. The interaction between these catalysts is carefully designed to ensure optimal performance of the entire exhaust after - treatment system.
Factors Affecting ASC Performance
Several factors can affect the performance of an ammonia slip catalyst.
Temperature
Temperature is one of the most important factors. Different types of ASC have different temperature windows where they work best. PGM-based ASC usually have good activity at lower temperatures, while base metal - based ASC may require higher temperatures to achieve optimal performance. If the exhaust gas temperature is too low, the reaction rate may be too slow, and there will be incomplete ammonia oxidation. On the other hand, if the temperature is too high, the catalyst may be deactivated or damaged.
Space Velocity
Space velocity is a measure of how fast the exhaust gas passes through the catalyst. A high space velocity means that the gas spends less time in contact with the catalyst, which can reduce the conversion efficiency of the ASC. Therefore, it's important to design the exhaust system to ensure that the space velocity is within the acceptable range for the specific ASC being used.
Poisoning and Fouling
ASC can be poisoned by certain substances in the exhaust gas, such as sulfur compounds, phosphorus, and heavy metals. These substances can adsorb onto the catalyst surface and block the active sites, reducing the catalyst's activity. Fouling can also occur when particulate matter in the exhaust gas accumulates on the catalyst surface, reducing the surface area available for the reaction.
Why Choose Our Ammonia Slip Catalysts?
As a supplier of ammonia slip catalysts, we offer high - quality products that are designed to meet the specific needs of our customers. Our catalysts are carefully engineered to provide excellent ammonia conversion efficiency, even under challenging operating conditions.
We use the latest manufacturing techniques and materials to ensure the durability and reliability of our catalysts. Our R & D team is constantly working on improving the performance of our products, developing new formulations that are more resistant to poisoning and fouling, and have better performance at different temperatures.
If you're looking for an ammonia slip catalyst for your vehicle or industrial process, we'd love to hear from you. Whether you need a PGM - based ASC for low - temperature applications or a base metal - based ASC for high - temperature environments, we have the solution for you. Contact us today to discuss your requirements and get a quote. We're here to help you find the best ammonia slip catalyst for your needs and ensure that you can comply with emissions regulations while protecting the environment.
References
- Johnson, T. V. (2013). Catalytic control of ammonia slip in diesel engines. SAE International Journal of Engines, 6(1), 1484 - 1493.
- Lietti, L., Ramis, G., & Tronconi, E. (1999). Ammonia oxidation over vanadia - titania catalysts. Journal of Catalysis, 181(2), 353 - 362.
- Kwak, J. H., & Peden, C. H. F. (2010). Recent advances in the science and technology of automotive selective catalytic reduction catalysts. Catalysis Reviews, 52(4), 420 - 455.



