Knowledge

Home/Knowledge/Details

What abnormalities may occur in the activated sludge process?

Food wastewater generally has good biochemical properties, and most food companies utilize biochemical treatment systems. Activated sludge, a common biochemical treatment method, is widely used in food wastewater treatment projects. Unstable operation of food plant wastewater treatment plants is often due to abnormal activated sludge operation.

 

So, what abnormalities can occur during the operation of the activated sludge process?

 

Sludge bulking: Filamentous bacteria provide a framework for flocs. Without sufficient filamentous bacteria, the flocs formed are weak. Normal activated sludge features large, dense flocs with good settling properties, a low SVI, and a clear supernatant. However, sludge in the sedimentation zone of a secondary clarifier or accelerated aeration tank exhibits a loose structure and poor settling properties, floating out of the tank with the water, deteriorating effluent quality and causing significant sludge loss. This phenomenon is called sludge bulking.

 

Sludge Floating: When the aeration tank is underloaded but the oxygen supply is excessive, the dissolved oxygen in the effluent may be high, causing ammonia nitrogen in the wastewater to be converted to nitrate by nitrifying bacteria. If this mixture experiences prolonged anoxic conditions (DO below 5 mg/L) in the secondary clarifier, denitrifying bacteria convert the nitrate into ammonia and hydrogen. The ammonia dissolves in water, while excessive nitrogen adsorbs onto the activated sludge, reducing its density and causing it to float to the surface.

 

Foaming: When wastewater contains synthetic detergents and other foaming substances, a large amount of foam forms on the aeration tank surface. In severe cases, the foam layer can reach heights of over one meter. During surface mechanical aeration, the bubbles isolate the air from the water, reducing the impeller's oxygenation capacity. The foam surface also adsorbs a large amount of activated sludge solids, affecting the sedimentation efficiency of the secondary clarifier and deteriorating the effluent quality. The foam is then blown away by wind, impacting environmental hygiene.