Knowledge

Home/Knowledge/Details

Methods for determining the proliferation of filamentous microorganisms

Methods for determining the proliferation of filamentous microorganisms:

① Reduce the BOD-SS load;

② Increase dissolved oxygen;

③ Adopt a plug-flow-like operation;

④ Sterilize or inhibit bacteria;

⑤ Add coagulants, etc.;

⑥ Observe the microbial phase.

 

Reduce the BOD-SS load
This method is based on the principle that low loads are less likely to cause expansion. Specifically, the BOD-SS load is maintained at approximately 0.3 kgBOD/kgSS.d, and no-load aeration is performed on factory holidays. Achieving a reduction in the SVI requires several days, and reducing the load also requires reducing wastewater discharge.

Increase dissolved oxygen
Under low dissolved oxygen conditions, filamentous microorganisms are more likely to absorb oxygen than flocculent microorganisms. Therefore, increasing dissolved oxygen will promote the growth of flocculent microorganisms.

Adopt a plug-flow-like operation
This method is based on the principle that batch or intermittent processing is less likely to cause expansion. Flocculent microorganisms can easily store substrate, resulting in greater proliferation compared to filamentous microorganisms.

Bactericidal or bacteriostatic treatments
Specific methods include adding chloride to the aeration tank, adding hydrogen peroxide to the return sludge, or adding acid to the aeration tank to adjust the pH to 3-4 and maintain this for several hours. Since the filamentous parts of filamentous bacteria come into direct contact with the chemicals, they are more affected than floc-forming bacteria, resulting in a higher mortality rate.

Adding coagulants, etc.
Adding substances such as iron or aluminum salts, clay, slaked lime, and high-molecular-weight coagulants to induce sludge coagulation will have a significant effect for a period of time, but repeated additions will reduce the effect.

Observing the microbial population
Regularly observe the microorganisms that make up activated sludge using a microscope to detect any abnormalities as early as possible so that preventive measures can be taken promptly. If the number of filamentous microorganisms increases, immediate measures must be taken to prevent sludge bulking.