When selecting a wastewater treatment process, juice plants need to comprehensively consider factors such as wastewater composition, treatment efficiency, economic costs, and environmental requirements. Generally speaking, a comprehensive treatment process that combines physical, chemical, and biological treatment methods can best meet the wastewater treatment needs of juice plants.
I. Physical Treatment Methods
1. Pretreatment:
Solid waste such as peels, pomace, and pulp residues are separated and filtered to reduce suspended solids in the wastewater. This step forms the foundation for subsequent treatment and helps improve overall treatment efficiency.
2. Flotation Degumming:
Flotation is used in a flotation tank to remove colloids and suspended solids from the wastewater. Flotation effectively removes fine suspended solids and oil from juice wastewater, improving the efficiency of subsequent biochemical treatment.
II. Chemical Treatment Methods
1. Neutralization:
Juice contains a high content of organic acids, requiring neutralization to balance the pH. Alkaline substances (such as sodium hydroxide) or acidic substances (such as sulfuric acid) can be added for neutralization to create a suitable environment for subsequent biological treatment.
2. Coagulation and Sedimentation:
Coagulation and sedimentation involves adding a coagulant to the wastewater, causing suspended particles and colloids in the wastewater to aggregate into larger particles and settle. This method removes pollutants such as suspended solids, color, and oil, reducing the burden on subsequent treatment.
III. Biological Treatment
1. Anaerobic Digestion and Decomposition:
The anaerobic reactor is equipped with anaerobic treatment equipment such as an upflow anaerobic sludge blanket (UASB) reactor to perform anaerobic digestion and decomposition of organic matter in the wastewater. Anaerobic treatment effectively removes organic matter from the wastewater and produces usable resources such as biogas.
2. Aerobic Treatment:
The activated sludge reactor performs aerobic treatment, providing microorganisms with sufficient oxygen through aeration and other methods, promoting their degradation of organic matter. Aerobic treatment further removes organic matter from the wastewater and improves effluent quality.
3. After anaerobic and aerobic treatment, the wastewater enters the biological aerated filter for advanced treatment. The biological aerated filter is filled with floating solid fillers and biofilms. Aeration and other methods promote microbial growth and metabolic activity, further removing pollutants from the wastewater.
IV. Advanced Treatment and Disinfection
1. Advanced Treatment:
Depending on the effluent quality requirements, advanced treatment technologies such as biological contact oxidation and biofiltration can be used to further treat the wastewater to remove residual organic matter, microorganisms, and other contaminants.
2. Disinfection:
The treated wastewater is disinfected to kill pathogenic microorganisms. Commonly used disinfectants include sodium hypochlorite and ozone. Disinfection is a key measure to ensure effluent quality safety.
V. Other Treatment Technologies
1. Catalytic Wet Oxidation (CWAO):
It is suitable for treating high-concentration, recalcitrant organic wastewater. This technology uses a catalyst and an oxidation reaction under high temperature and high pressure to break down organic matter in the wastewater into harmless substances.
2. MVR Evaporator:
This technology utilizes the secondary steam generated by the evaporation system itself and its energy for evaporation, offering energy-saving and environmentally friendly features. Suitable for the concentration and recovery of juice wastewater.




